A R P D e t a i l s S c r e e n
Access this screen by selecting the applicable <Index> number on the ARP Table
screen.
Figure 3-48. ARP Details Screen
Endpoint
Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. The default is the LAN.
IP Address
IP Address of the circuit.
MAC Address
The MAC Address of the Host to be reached.
ARP Status
Displays whether this static ARP is enabled or disabled.
8300-A2-GB20-00
Values: 0.0.0.0
2 55.255.255.255
−
Default: 0.0.0.0
Values: A 6-byte value
Default: 00-00-00-00-00-00
Values: Enable, Disable
Default: Enable
April 2003
3. VT100 Interface
3-57