Table of Contents
Advertisement
2. Web Server Interface
Figure 2-41. IP Gateway Details Screen
RIP Parameters
RIP Enable
Globally enables RIP 1, RIP 2, or No RIP.
RIP Trust
Globally enables the trusted neighbors feature. If there is a list of trusted neighbors
in an IP Gateway, only RIP packets coming from those trusted neighbors will be
Neighbors
used to build the internal routing table.
RIP Interval
Interval for RIP packet to be sent. Default is 30 seconds.
RIP Domain
Value representing the RIP domain. Default is 0.
OSPF Parameters
OSPF Enable
This Protocol is suitable for complex networks with a large number of routers. If
a large network is involved, OSPF may be the solution for the user.
OSPF Router ID
This 32-bit number assigned to each router running the OSPF protocol uniquely
identifies the router within an autonomous system. Each router requires a unique
router ID. Default is the LAN IP Address of the unit.
2-50
Values: Disable, Enable RIP1, Enable RIP2
Default: Enable (RIP2)
Values: Enable, Disable
Default: Enable
Values: Disable, Enable
Default: Disable
April 2003
8300-A2-GB20-00
Advertisement
Table of Contents
