Table of Contents
Advertisement
Remote
Enables/disables support for remote management of the units in an SHDSL line
from the STU-R via the EOC.
Transmission Mode
Sets the regional setting of the span represented as a bit-map of possible settings.
NOTICE:
PSD Type
Sets the use of symmetric or asymmetric Power Spectral Density (PSD) mask.
NOTICE:
Line Probe
Enables or disables rate adaptation line probe.
To set any configuration profile parameter, enter the desired value/information in a
field or select the desired parameter from one of the pull-down lists, and then click
on the Submit button.
Alarm Profile Table Screen
Clicking on the Alarm Profiles button on the Network screen will display the screen
shown in
Figure 2-7.
8300-A2-GB20-00
Values: Enabled, Disabled
Default: Enabled
Values: Annex-A (ITU-T G.991.2) , Annex-B (ITU-T G.991.2)
Default: Annex-B
When the 8300 Endpoint is operating with Unit Type set to TU-R, it
supports Annex-A or Annex-B. The configuration of the TU-C unit
determines the actual transmission mode used. Annex-A must be
used for U.S. and Canadian deployments.
Values: Symmetric, Asymmetric
Default: Symmetric
The 8300 Endpoint supports only symmetric PSD.
Values: Enabled, Disabled
Default: Enabled
Figure
2-7.
Alarm Profile Table Screen
April 2003
2. Web Server Interface
2-9
Advertisement
Table of Contents
