Paradyne Hotwire 8300 User Manual page 168

3. VT100 Interface
Default Translation Forces translation on a specific IP port regardless of the source IP Address. If
Default Translation is set to Enable, the packet will never be discarded, but will
always pass through the translation path. Therefore, any packets with a
destination address different from the global/Internet network address will be
processed by the IP Gateway, and may be routed to another port. If this parameter
is set to Disable, no packet with a destination address different from the
global/Internet address will be processed. Setting this parameter to Disable will
override an Enable parameter set under Filter Non Local Address on the NAT
Details menu.
Type Defines whether this port is local or global. Default is LAN global. All others are
local.
IP Address IP Address of this port. Default is the value defined in the IP Gateway Circuit
Table.
Mask Mask related to the defined IP Address. Default is the value defined in the IP
Gateway Circuit Table.
Endpoint The Endpoint name of the circuit associated with the LAN or WAN port. Default is
LAN for the first port.
The Add New prompt lets the user add additional ports.
Figure 3-58. NAT Port Details Screen
The NAT Port Details screen provides the following user-activated prompts:
3-66
Prompt Function
Delete Deletes the specified NAT Port.
Status Displays the NAT Port Status screen (Figure 3-59.).
April 2003 8300-A2-GB20-00