Table of Contents
Advertisement
3. VT100 Interface
Figure 3-37. Service Aware Screen
Rule Config Screen
Use the Rule Config screen
(Figure
3-38) to establish Service Aware parameters.
To establish a rule, select the desired rule configuration options, provide the
appropriate filter information where required, and press the Esc key.
Figure 3-38. Rule Config Screen
The paragraphs below describe the rule configuration parameters and their
options.
Service
Selects the service to which the rule applies. Select from a pull-down menu that
lists available services.
VPI
Selects the VPI to which the rule applies.
3-45
8300-A2-GB20-00
April 2003
Advertisement
Table of Contents
