Table of Contents
Advertisement
2. Web Server Interface
Figure 2-74. Bridge Port Details
Enable
Enables or disables Bridging on this port.
Endpoint
Endpoint name.
BPDU Option
Shows if BPDU packet will be sent and received on this port.
Filter By Multicast
Filters multicast messages received on this port, which reduces the load on the
WAN connection.
Addr Dest
Filter By Broadcast
Filters broadcast messages received on this port, which reduces the load on the
WAN connection.
Addr Dest
Forward IP Frames
Setting this option to Yes specifies that only IP frames will be forwarded and all
other frames will be filtered.
Only
Priority
Value of priority associated with this port. The lower the value, the higher the
priority.
Path Cost
Value of efficiency of the path to the port. A higher path cost indicates a lower link.
State
If Enabled, reflects the state of the port. Blocking means there is no data transfer
between LANs. Listening means the frames received from this port are filtered, but
do not modify the Lookup Table. Learning means that while the port continues to
look at frames without participating in data transfer, the frames received from the
port will be used to update the Lookup Table. Forwarding means the port
participates fully in data transfer and the frames received are used to update the
Lookup Table.
Designated Root
MAC Address of the designated root of the spanning-tree topology.
2-78
April 2003
8300-A2-GB20-00
Advertisement
Table of Contents
