Paradyne Hotwire 8300 User Manual page 161

The fields displayed on the Area Table screen are described below.
A r e a D e t a i l s S c r e e n
This screen displays the details associated with a defined Area.
Figure 3-51. Area Details Screen
Area ID This parameter has the same format as the IP Address of the Mask Address.
Enable Displays whether or not this Area is enabled.
Auth Type Indicates type of Authentication.
8300-A2-GB20-00
Field Description
Area ID Displays the ID of the Area (represented by an IP Address).
Ena Displays whether the defined area is enabled or disabled.
Auth Type Indicates Area validation.
Stub Displays whether or not the defined area is a Stub Area.
Addr Summary Displays the Address Summary of the defined Area.
Mask Summary Displays the Mask Summary of the defined Area.
Ad Displays whether advertising is enabled or disabled for this Area.
Values: 0.0.0.0 2 55.255.255.255
−
Default: 0.0.0.0
Values: Enable, Disable
Default: Enable
Values: Simple, None
Default: None
April 2003
3. VT100 Interface
3-59