3. VT100 Interface
The NAT Port Status screen shown below displays for each port the processed
packets from specific IP Addresses.
Figure 3-59. NAT Port Status Screen
IP Address
Original IP Address of the host.
NAT IP Address
Translated IP Address of the host.
Processed Packets
Number of packets processed by NAT for this address.
S t a t i c U D P T r a n s T a b l e S c r e e n
The Static UDP Trans Table screen
(Figure
3-60) allows static mapping of global
UDP Server ports to a local host IP Address/port combination. The parameters
described below enable access to UDP Servers on the private/corporate network
behind the NAT. The parameters may be used only when in NAPT mode.
Figure 3-60. Static UDP Translation Table Screen
3-67
8300-A2-GB20-00
April 2003