Table of Contents
Advertisement
To change either the Admin or Read-Only password, you must enter it once in the
New Password field and then re-enter the same password in the Confirm
Password field. After entering the new password in both these fields, click the
Change Admin Password or the Change Read Only Password button to update
and establish the new password.
NOTICE:
Log Out
The Log Out screen
Server.
Figure 2-79. Log Out Screen
The Log Out function is only available after user password protection has been
set. You will be automatically logged out of the system 1 hour after you log on
using a password to gain access; after this, you will be required to enter the
password to gain write access.
8300-A2-GB20-00
Remember that passwords are case-sensitive. When logging on,
password must be entered exactly as it was programmed.
(Figure
2-79) is used to log the current user off the Web
April 2003
2. Web Server Interface
2-83
Advertisement
Table of Contents
