Table of Contents
Advertisement
Applications
The Applications screens describe configuration tables and statistics for Layer 3
and above that do not map to a specific service or interface.
Service Aware
The Service Aware function recognizes IP traffic on the WAN and counts the
number of frames and bytes passed for a specific service based on filters by
VPI/VCI, by IP Address, and by IP Port. Each row of the Service Aware table
represents a specific set of filter parameters known as a rule. Each rule is
established through the Rule Config screen, which is accessed by clicking the
Rule Details button at the bottom of the Service Aware screen.
The Service Aware screen
packet counts for up to 10 rules. This table indicates which Service Aware filters
are enabled or disabled, and shows the specific VPI/VCI, IP Address, and IP Port
by which the IP traffic is filtered. In addition, this table shows the Tx Alarm
Threshold and the current Tx Alarm status (if enabled) for each rule.
Figure 2-34. Service Aware Screen
The Service Aware screen provides a Clear Alarms user-activated buttons:
8300-A2-GB20-00
(Figure
2-34) provides a table showing these filtered
April 2003
2. Web Server Interface
2-43
Advertisement
Table of Contents
