Table of Contents
Advertisement
3. VT100 Interface
Applications
Select Applications in the Main Menu screen to display the various 8300 Endpoint
applications
Layer 3 and above that do not map to a specific service or interface.
Figure 3-36. Applications Screen
Service Aware
The Service Aware function recognizes IP traffic on the WAN and counts the
number of frames and bytes passed for a specific service based on filters by
VPI/VCI, by IP Address, and by IP Port. Each row of the Service Aware table
represents a specific set of filter parameters known as a rule. Each rule is
established through the Rule Config screen, which is accessed by selecting Rule
Details.
The Service Aware screen
packet counts for up to 10 rules. This table indicates which Service Aware filters
are enabled or disabled, and shows the specific VPI/VCI, IP Address, and IP Port
by which the IP traffic is filtered. In addition, this table shows the Tx Alarm
Threshold and the current Tx Alarm status (if enabled) for each rule.
3-44
(Figure
3-36) associated with configuration tables and statistics for
(Figure
3-37) provides a table showing these filtered
April 2003
8300-A2-GB20-00
Advertisement
Table of Contents
