Table of Contents
Advertisement
Report #
Displays a unique number used to identify the generated report. This number is
generated automatically, is incremented sequentially for each report, and can be
used by management stations for automatic polling (via the ipadv2.mib).
Size
Displays the actual number of IP Addresses identified as Top Talkers in the
generated report. The maximum report size is 20.
Start Time
Displays the time at which the Top Talkers report was initiated (based on System
Up Time).
System Up Time
Displays the amount of time that the unit has been operational since it was turned
on or last reset.
The Top Talkers table reports in descending order the IP Addresses that have
generated the most traffic during the requested report's duration. For each IP
Address listed, the report displays the number of Rx frames, Rx octets, Tx frames,
and Tx octets that have been passed across it. In addition, the Timestamp field
indicates the time at which a packet was examined for the specified IP Address.
Originate Ping
The 8300 Endpoint Originate Ping
companies determine if a network is properly configured and also helps them
maintain SLAs.
Figure 3-68. Originate Ping Screen
The parameters on the left side of the screen offer you the following choices: Start
Ping, Stop Ping, or Reset the Status (clears all counts activity). Other parameters
include the following:
Dest IP Address
Destination IP Address of sent Ping request messages.
8300-A2-GB20-00
(Figure
3-68) function helps telephone
April 2003
3. VT100 Interface
3-75
Advertisement
Table of Contents
