Table of Contents
Advertisement
editing. You may insert characters or delete them. Typed data must always be
inserted rather than typed over. If the field is full, you must first delete at least one
character before you can add another.
of the screen, except in the case of the Main Menu, which shows the screen
components that will appear at the top of all screens.
The lower right corner of each screen displays whether or not a Save and Restart
is necessary when parameters are changed on the currently displayed screen.
NOTICE:
Menu Structure
The Main Menu screen (shown in
menus. To activate a specific menu, tab to it (or use your arrow keys) and press
Enter. To exit this or any subsequent menu, press the Esc key. If you exit the Main
menu, the terminal interface program terminates. This is a valid way to end a
session. When you exit any menu other than the Main menu, you will be returned
to the previous screen.
Figure 3-2.
CAUTION:
8300-A2-GB20-00
The screen captures throughout this chapter show only the configuration portion
The data on VT100 screens is automatically refreshed every 5
seconds. You may also press Ctrl+U to redisplay the screen.
VT100 Main Menu Screen
If you do not enter a keystroke for 10 minutes, the terminal
interface logs off automatically.
April 2003
Figure
3-2) lists the functional user-accessible
3. VT100 Interface
3-3
Advertisement
Table of Contents
