Table of Contents
Advertisement
To remove the rack handles, do the following:
1.
Turn off all attached devices and the server.
2.
Disconnect the ac power cord from the electrical outlet.
3.
Remove the screws of the rack handles.
4.
Slide and pull-out the rack handles.
To reinstall, reverse the steps above.
2.2.3 Top cover replacement
Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".
CAUTION:
If the device has doors, ensure that you remove or secure the doors before moving or lifting the device to protect
against personal injury. The doors will not support the weight of the device.
To remove the top cover, do the following:
1. Turn off all attached devices and the server.
2. Disconnect the ac power cord from the electrical outlet.
3. Unlock the latch with screwdriver (Step 1).
4. Push button and lift the latch (step 2).
5. Pull the cover backwards, then lift to remove (Step 3).
23
Advertisement
Table of Contents
