Auger/Rotary Disc/Draper-Ready Configuration - Quick Coupler Connections - MacDon M1 Series Unloading And Assembly Instructions

• Rotary disc ready configuration with quick couplers (A): For
Rotary Disc Only Configuration – Quick
instructions, refer to
Coupler Connections, page
Auger/Rotary Disc/Draper-Ready Configuration – Quick Coupler Connections
Windrowers with the auger/rotary disc/draper-ready configuration are equipped with the hydraulic connections needed to
pair with an auger, rotary disc, or a draper header.
1. Ensure that hose (A) is disconnected from windrower
receptacle (B) and placed in storage cup (C) on the
multicoupler.
2. Remove the extra hydraulic quick couplers from pressure
hose (A) and return hose (B). These can be stored and used
as replacement parts.
NOTE:
It is normal to have an extra set of quick couplers on
windrowers with the auger/rotary disc/draper-ready
configuration.
215620
ATTACHING A HEADER TO THE WINDROWER
188.
Figure 5.139: Header Hydraulics Configuration –
Rotary Disc-Ready with Quick Couplers
Figure 5.140: Couplers – Auger/Rotary/Draper
Header-Ready Configuration with Case Drain Kit
Installed
Figure 5.141: Hydraulic Quick Couplers
184
Revision A