Auger/Rotary Disc/Draper-Ready Configuration - Quick Coupler Connections - MacDon R113 Unloading And Assembly Instructions

For rotary disc-ready configuration with quick couplers (A),
6.2.3 Rotary Disc-Only Configuration – Quick Coupler
refer to
Connections, page 73 for instructions.
6.2.1 Auger/Rotary Disc/Draper-Ready Configuration – Quick Coupler Connections
Windrowers with the auger/rotary disc/draper-ready configuration are equipped with the hydraulic connections needed to
pair with an auger, rotary disc, or a draper header.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
CAUTION
Do NOT stand on an unlocked platform. It is unstable and may cause you to fall.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (fixed and
movable) hydraulic couplers.
1. Shut down the engine, and remove the key from the ignition.
2. Approach platform (A) on the left side of the windrower.
Ensure that the cab door is closed.
3. Push latch (B) and pull platform (A) toward the walking
beam until it stops and the latch engages.
262300
ATTACHING HYDRAULIC AND ELECTRICAL COMPONENTS
Figure 6.10: Header Hydraulics Configuration – Rotary
Disc-Ready with Quick Couplers
Figure 6.11: Left Platform
68
A A
A
B
1015479
Revision A