Technical Data; Device Data; Power Supply; Communication - WAGO 8FDI 24V PROFIsafe 750-662/000-004 Manual

28 Device Description
3.6

Technical Data

3.6.1

Device Data

Table 9: Technical Data – Device
Width
Depth (from upper-edge of DIN-rail)
Height
Weight
3.6.2

Power Supply

Table 10: Technical Data ‒ Power Supply via Local Bus
Nominal voltage
Power consumption
Overvoltage category per IEC 61131-2 /
UL 61010-2-201
Table 11: Technical Data ‒ Power Supply via Power Jumper Contacts
Nominal voltage
Tolerance range
Current consumption
Current via power jumper contacts
Overvoltage category per IEC 61131-2 /
UL 61010-2-201
Reverse voltage protection for power
jumper contacts
Isolation (peak value)
3.6.3

Communication

Table 12: Technical Data – Communication
Usable fieldbus couplers/controllers
GSD specification
Number of F I/O modules per node
(fieldbus coupler/controller)
Channel-granular passivation
Manual
Version 1.0.0, valid from HW/SW Version 01/01
max.
typ.
max.
max.
WAGO I/O System
750-662/000-004 8FDI 24V PROFIsafe
24 mm
64 mm
100 mm
Approx. 100 g
5 VDC from system power supply
120 mA
II
24 VDC via power jumper contacts
−25 % ... +30 %
30 mA + load current
10 A
II
Yes
500 V system voltage/field level (power
jumper contacts)
750-375, SW 10 or higher
750-377, SW 10 or higher
V2.4
See the information in the manual for
the corresponding fieldbus coupler/
controller
Available