Back Panel; Switch Hardware Interfaces; Rj-45 Ports For 10/100/1000M Base-T Ethernet Connectivity - NETGEAR GS724TPv3 Hardware Installation Manual

24-Port Gigabit Ethernet (Hi-Power) PoE+ Smart Switch with 2 SFP Ports

Back panel

The back panel provides a Kensington lock and AC power receptacle. (The switch
integrates a fixed, internal power supply.)
The following figures show the back panels.
Figure 3. Back panel model GS724TPv3
Figure 4. Back panel model GS724TPPv3

Switch hardware interfaces

The following sections describe the hardware interfaces on the switch.

RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity

All RJ-45 copper ports support autosensing. When you insert a cable into an RJ-45 port,
the switch automatically detects the maximum speed (10 Mbps, 100 Mbps, or 1 Gbps)
and duplex mode (half-duplex or full-duplex) of the attached device. All ports support
a Category 5e (Cat 5e) cable (or higher-rated Ethernet cable) terminated with an 8-pin
RJ-45 connector.
Hardware Overview 17 Hardware Installation Guide