Auto-Summary; Default-Information Originate (Rip); Default-Metric (Rip) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.6.4 auto-summary

This command enables the RIP auto-summarization mode.
Default
Format
Mode
14.6.4.1 no auto-summary
This command disables the RIP auto-summarization mode.
Format
Mode

14.6.5 default-information originate (RIP)

This command is used to control the advertisement of default routes.
Format
Mode
14.6.5.1 no default-information originate (RIP)
This command is used to control the advertisement of default routes.
Format
Mode

14.6.6 default-metric (RIP)

This command is used to set a default for the metric of distributed routes.
Format
Mode
14.6.6.1 no default-metric (RIP)
This command is used to reset the default metric of distributed routes to its default value.
Format
Mode
Routing Commands
disabled
auto-summary
Router RIP Config
no auto-summary
Router RIP Config
default-information originate
Router RIP Config
no default-information originate
Router RIP Config
default-metric <0-15>
Router RIP Config
no default-metric
Router RIP Config
v4.1, October 2008
14-55