Default-Information Originate (Ospf); Default-Metric (Ospf); Distance Ospf (Ospf) - NETGEAR ProSafe M7100-24X User Manual

default-information originate (OSPF)

This command is used to control the advertisement of default routes.
Default
• metric—unspecified
• type—2
Format
default-information originate [always] [metric <0-16777214>]
[metric-type {1 | 2}]
Mode
Router OSPF Config
no default-information originate (OSPF)
This command is used to control the advertisement of default routes.
Format
no default-information originate [metric] [metric-type]
Mode
Router OSPF Config

default-metric (OSPF)

This command is used to set a default for the metric of distributed routes.
Format
default-metric <1-16777214>
Mode
Router OSPF Config
no default-metric (OSPF)
This command is used to set a default for the metric of distributed routes.
Format
no default-metric
Mode
Router OSPF Config

distance ospf (OSPF)

This command sets the route preference value of OSPF in the router. Lower route preference
values are preferred when determining the best route. The type of OSPF route can be
intra, inter, or external. All the external type routes are given the same preference
value. The range of <preference> value is 1 to 255.
Default
110
Format
distance ospf {intra-area <1-255> | inter-area <1-255> | external
<1-255>}
Mode
Router OSPF Config
ProSafe Managed Switch
Routing Commands
271