User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode
snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also called
public).
Format
Mode
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also called
private).
Format
Mode
snmp-server enable traps
This command enables the Authentication Flag.
Default
Format
Mode
no snmp-server enable traps
This command disables the Authentication Flag.
Format
Mode
snmp-server enable traps bcaststorm
This command enables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
8-30
no snmp-server community mode <name>
Global Config
snmp-server community ro <name>
Global Config
snmp-server community rw <name>
Global Config
Enabled
snmp-server enable traps
Global Config
no snmp-server enable traps
Global Config
December 2004, 202-10010-02
Switching Commands