User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
network
This command is used to configure the subnet number and mask for a DHCP address pool on the
server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The
prefix-length is an integer from 0 to 32.
Default
Format
Mode
no network
This command removes the subnet number and mask.
Format
Mode
service dhcp
This command enables the DHCP server and relay agent features on the router.
Default
Format
Mode
no service dhcp
This command disables the DHCP server and relay agent features.
Format
Mode
DHCP Server Show Commands
These commands display the DHCP Server address bindings, and statistics.
9-6
None
network <networknumber> [mask | prefixlength]
DHCP Pool Config
no network
DHCP Pool Config
Disabled
service dhcp
Global Config
no service dhcp
Global Config
202-10009-01_060204
DHCP Server Commands