Vlan Port Priority All; Vlan Priority - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

6.4.1 vlan port priority all

This command configures the port priority assigned for untagged packets for all ports
presently plugged into the device. The range for the priority is 0-7. Any subsequent per
port configuration will override this configuration setting.
Format
Mode

6.4.2 vlan priority

This command configures the default 802.1p port priority assigned for untagged packets
for a specific interface. The range for the priority is 0-7
Default
Format
Mode
6-18
vlan port priority all <priority>
Global Config
0
vlan priority <priority>
Interface Config
v4.1, October 2008
VLAN Commands