Mass Storage" Page; Table 85: Wbm "Mass Storage" Page - "Devices" Group; Table 86: Wbm "Mass Storage" Page - "Create New Filesystem On Memory - WAGO Compact Controller 100 Manual

156 Appendix

15.1.1.2.11 "Mass Storage" Page

The "Mass Storage" page displays information and settings for the storage
media.
The group title contains the designation for the storage media ("Memory Card" or
"Internal Flash") and, if this storage medium is also the active partition, the text
"Active Partition".
"Devices" Group
An area with information on the storage medium is displayed for each storage
medium found.
Table 85: WBM "Mass Storage" Page – "Devices" Group
Parameter
<Device>
Boot device
Volume name
"Create new Filesystem on Memory Card" Group
Table 86: WBM "Mass Storage" Page – "Create new Filesystem on Memory Card" Group
Parameter
Filesystem type
Label
Data is deleted!
Any data stored in the storage medium is deleted during formatting!
To format the specified storage medium, click [Start].
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
751-9301 Compact Controller 100
Explanation
The storage medium is displayed.
This shows whether the device has booted from this
storage medium.
The name of the storage medium is displayed.
Meaning
You can select the format in which the filesystem
should be created on the memory card.
The filesystem is created in Ext4 format.
Ext4
The files are not readable under Windows!
FAT The filesystem is created in FAT format.
Specify the name for the storage medium when
formatted.
WAGO I/O System Compact