Mask:source; Mask:operate - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System

:MASK:SOURce

Syntax
:MASK:SOURce <source>
:MASK:SOURce?
Description
Set or query the source of the pass/fail test.
Parameter
Name
<source>
Explanation Only the channel enabled can be selected as the source. You can sent
the :CHANnel<n>:DISPlay
Return The query returnsCHAN1, CHAN2, CHAN3 or CHAN4.
Format
Example
:MASK:SOURce CHANnel2
Related
:CHANnel<n>:DISPlay
Command

:MASK:OPERate

Syntax
:MASK:OPERate <oper>
:MASK:OPERate?
Description
Run or stop the pass/fail test, or query the status of the pass/fail test.
Parameter
Name
<oper>
Explanation
Before executing this command, you need to send the
the pass/fail test.
Return
The query returns RUN or STOP.
Format
Example :MASK:OPERate RUN
Related :MASK:ENABle
Command
DS1000Z Programming Guide
Type Range
Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4}
command to enable the desired channel.
Type Range
Discrete {RUN|STOP}
:MASK:ENABle command to enable
RIGOL
Default
CHANnel1
Default
STOP
2-47