Display System Commands - Rigol DS1000 Series Programming Manual

Display System Commands

Display System Commands are used to adjust the display mode.
Display Commands include:
:DISPlay:TYPE

:DISPlay:GRID

:DISPlay:PERSist

:DISPlay:MNUDisplay

:DISPlay:MNUStatus

:DISPlay:CLEar

:DISPlay:SCReen

:DISPlay:BRIGhtness

:DISPlay:INTensity

We will give specific explanations for each command in the following part.
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
RIGOL
2-31