Adjusting Reel Drive Chain Tension; Loosening Reel Drive Chain - MacDon D65 Operator's Manual

Double-Reel Drive:
2. Position lower drive cover (B) onto the reel drive (if
previously removed) and secure it with three bolts (A).
3. Position upper drive cover (B) onto the reel drive and lower
cover (C), and secure it with six bolts (A).

5.9.2 Adjusting Reel Drive Chain Tension

The reel drive chain transfers power from the hydraulically driven reel motor to the sprockets that rotate the reels.

Loosening Reel Drive Chain

The tension on the reel drive chain can be loosened to allow access to reel drive components.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the header for any reason.
1. Shut down the engine, and remove the key from the ignition.
2. Remove the drive cover. For instructions, refer to
214327
MAINTENANCE AND SERVICING
Figure 5.213: Drive Cover – Double Reel
Figure 5.214: Drive Cover – Double Reel
Removing Reel Drive Cover, page
229
A
A
227.
B
B
C
Revision B