Moving Right (Rear) Wheels Into Transport Position - MacDon D65 Operator's Manual

12. Connect plug (A) for lights.

Moving Right (Rear) Wheels into Transport Position

To move the right-hand transport wheels into Transport
position, follow these steps.
1. At wheels at the right end of header, remove hairpin (A)
from latch.
2. Lift latch (B), disengage right axle, and lower to ground.
CAUTION
Stand clear of wheels and release linkage carefully
as wheels will drop once the mechanism is
released.
3. Carefully pull handle (C) to release the spring and let
the wheel drop to the ground.
4. Lift wheel and linkage with handle (D) and position
linkage in second slot from bottom.
5. Lower handle (C) to lock.
6. Remove pin (A) and install at (B) to secure linkage.
Turn pin (A) to lock.
7. To position the left wheel (C), pull pin (D), swivel wheel
counterclockwise, and re-lock with pin (D).
169594
OPERATION
Figure 4.91: Field to Transport - LH side
Figure 4.92
Figure 4.93
A - Pin
C - Left wheel
100
B - Pin installation location
D - Pin
Rev. C