Korg KRONOS SGX-2 Parameter Manual page 625

"GE Select": a drum pattern (a pattern of GE category
Drums)
"Input Channel": Tch
"Output Channel" 03
7. In Track Select, select Track01, and play the
keyboard.
(KARMA function on)
The Guitar riff of KARMA Module A will be sounded by
the Guitar type program.
Simultaneously, the drum pattern of KARMA Module C
will be sounded by the Drums program.
8. In Track Select, select Track02, and play the
keyboard.
(KARMA function on)
The Bass riff of KARMA Module B will be sounded by
the Bass type program.
Simultaneously, the drum pattern of KARMA Module C
will be sounded by the Drums program.
Track Thru (when KARMA Off)
"Input Channel" and "Output Channel" settings are normally
valid only when the KARMA ON/OFF switch is on.
As an exception, "Track Thru" specifies whether the MIDI
data that passes through the KARMA Module will be sent
(Thru) to the track when the KARMA ON/OFF switch is off.
On (checked): MIDI data that passes through the KARMA
Module will be sent on the "Output Channel" to the track
when the KARMA ON/OFF switch is off.
Off (unchecked): MIDI data that passes through the
KARMA Module will not be sent to the track when the
KARMA ON/OFF switch is off.
For examples of using this setting, see "Timbre Thru (when
KARMA Off)" on page 487.
Module – Track MIDI Display
This shows the MIDI tracks that will be sounded by each
KARMA Module, according to the MIDI output channel
settings of each KARMA Module and the MIDI channel of
each track (Sequencer 2–1b: MIDI Channel).
v 7–1: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Memory Status. For more information, see "Memory
Status" on page 637.
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Copy KARMA Module. For more information, see
"Copy KARMA Module" on page 520.
Sequencer P7: KARMA 7–1: GE Setup/Key Zones
• 3: Initialize KARMA Module. For more information,
see "Initialize KARMA Module" on page 521.
• 4: Copy Scene. For more information, see "Copy Scene"
on page 521.
• 5: Swap Scene. For more information, see "Swap Scene"
on page 521.
• 6: Capture Random Seed. For more information, see
"Capture Random Seed" on page 521.
• 7: FF/REW Speed. For more information, see "FF/REW
Speed" on page 638.
• 8: Set Location (for Locate Key). For more
information, see "Set Location (for Locate Key)" on
page 639.
• 9: Copy From Program. For more information, see
"Copy From Program" on page 639.
[Off, On]
611