4-8: Set Up Controllers - Korg KRONOS SGX-2 Parameter Manual

Sampling mode
v 4–1: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Delete Sample. For more information, see "Delete
Sample" on page 737.
• 1: Copy Sample. For more information, see "Copy
Sample" on page 738.
• 2: Rename Sample. For more information, see "Rename
Sample" on page 738.
• 3: Move Sample. For more information, see "Move
Sample" on page 738.
• 4: Sample Mono To Stereo. For more information, see
"Sample Mono To Stereo (Change Sample Type)" on
page 739.
• 5: Delete MS. For more information, see "Delete MS
(Delete Multisample)" on page 739.
• 6: Copy MS. For more information, see "Copy MS
(Copy Multisample)" on page 740.
4–8: Set Up Controllers
4–8a
4–8b
Specifies the functions that the SW1 switch, SW2 switch,
and the Realtime Modulation knobs 5–8 will have in
Sampling mode.
In Sampling mode, it is not possible to use AMS to
control program parameters.
718
• 7: Rename MS. For more information, see "Rename MS
(Rename Multisample)" on page 740.
• 8: Move MS. For more information, see "Move MS
(Move Multisample)" on page 741.
• 9: Convert MS To Program. For more information, see
"Convert MS (Multisample) To Program" on page 740.
• 10: MS Mono To Stereo. This will appear only if the
current MS is Mono. For more information, see "MS
Mono To Stereo/MS Stereo To Mono
(Change Multisample Type)" on page 741.
• 10: MS Stereo To Mono. This will appear only if the
current MS is Stereo. For more information, see "MS
Mono To Stereo/MS Stereo To Mono
(Change Multisample Type)" on page 741.
• 11: Optimize RAM. For more information, see
"Optimize RAM" on page 155.
• 12: Select Directory/File for Sample to Disk. This
applies only when Save to is set to Disk. For more
information, see "Select Directory/File for Sample To
Disk" on page 156.
• 13: Auto Sampling Setup. For more information, see
"Auto Sampling Setup" on page 742.
4–8a: Panel Switch Assign
Assigns the functions of the SW1 and SW2 switches. For
details on the functions that you can assign, see "SW1/2
Assignments" on page 1121.
Note: the Chord Switch assignment is not available in
Sampling mode.
4–8PMC