Table of Contents
Advertisement
If a mono insert effect is in use, the settings you make here
will be ignored. In this case, the "Pan (CC#8)" parameter in
P8– Insert FX page will adjust the panning of the sound after
the Insert Effect. For details, see "Mixer" on page 888.
Note: You can use the control surface to adjust the pan. You
can also make this setting from the front panel mixer section
or from the P0– Control Surface page of the LCD. The
procedure given below describes how to make these settings
from the front panel.
1. Press the CONTROL ASSIGN MIXER AUDIO
switch to select tracks 1–8 or 9–16.
2. If you want to control the pan, EQ, and effect send
levels of a single track, press the MIXER KNOBS
switch to select CHANNEL STRIP. Then press the
MIX SELECT 1/9–8/16 switch for the track you want
to control the pan.
If you want to adjust the pan of tracks 1–8 or 9–16
together, press the MIXER KNOBS switch to select
INDIVIDUAL PAN.
3. If you've selected CHANNEL STRIP, use the MIX
CHANNEL STRIP PAN (knob 1) to adjust the pan.
If you've selected INDIVIDUAL PAN, use the MIX
CHANNEL STRIP knobs to adjust the pan of tracks 1–8
or 9–16.
You can adjust the knobs in a range of L000 to R127.
(Random pan is not available for audio tracks.)
For paired audio tracks, the above parameters are
controlled by the odd-numbered audio track.
These parameters will not be controlled if you edit the
even-numbered audio track.
If, however, in the Stereo Pair page menu command you
set "Pan Mode" to Index, the Pan of the even-numbered
audio track will be valid.
Volume
This fader adjusts the volume of the Audio Track. The meter
to the left of the fader displays its audio level in realtime.
Note: You can use the control surface to adjust the volume.
You can also make this setting from the front panel mixer
section or from the P0– Control Surface page of the LCD.
The procedure given below describes how to make these
settings from the front panel.
1. Press the CONTROL ASSIGN MIXER AUDIO
switch to select tracks 1–8 or 9–16.
2. Use the MIX VOLUMES 1/9–8/16 sliders to adjust the
volume.
For paired audio tracks, the above parameters are
controlled by the odd-numbered audio track.
These parameters will not be controlled if you edit the
even-numbered audio track.
Track 02...16 (Track Number)
For details, see "Track 01 (Track Number)" on page 533.
v 0–2: Page Menu Commands
You can use a front-panel shortcut for menu items 0-9. For
more information on these shortcuts, see "ENTER + 0-9:
shortcuts for menu commands" on page 153.
• 0: Memory Status. For more information, see "Memory
Status" on page 637.
Sequencer P0: Play/REC 0–2: Audio Track Mixer
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Rename Song. For more information, see "Rename
Song" on page 637.
• 3: Initialize Song. For more information, see "Initialize
Song" on page 637.
• 4: Copy From Song. For more information, see "Copy
From Song" on page 637.
• 5: Load Template Song. For more information, see
"Load Template Song" on page 637.
• 6: Save Template Song. For more information, see
"Save Template Song" on page 638.
• 7: FF/REW Speed. For more information, see "FF/REW
Speed" on page 638
• 8: Set Location (for Locate Key.) For more information,
see "Set Location (for Locate Key)" on page 639.
• 9: GM Initialize. For more information, see "GM
Initialize" on page 639.
• 10: Copy From Combi. For more information, see
"Copy from Combi" on page 639.
• 11: Copy From Program. For more information, see
"Copy From Program" on page 639.
• 12: Add to Set List. For more information, see "Add To
Set List" on page 154.
• 13: Stereo Pair. For more information, see "Stereo Pair"
on page 641.
• 14: Auto HDR/Sampling Setup. For more information,
see "Auto HDR/Sampling Setup" on page 642.
• 15: Load required samples. For more information, see
"Load required samples" on page 154.
[000...127]
537
Advertisement
Table of Contents
