0-3: Midi Track Loop - Korg KRONOS SGX-2 Parameter Manual

Sequencer mode
0–3: MIDI Track Loop
0–1a
0–1b
0–3a
When playing or recording a song, you can independently
loop the MIDI tracks.
0–3a: Track Select
Selected Track Info
This displays information about the currently selected MIDI
or audio track. For more information, see "0–1b: Track
Program Select" on page 530.
Track 01 (Track Number)
Category
Indicates the category.
Track Play Loop
Specifies looping for a MIDI track.
On (checked): That track will loop between "Loop Start
Measure" and "Loop End Measure."
Loop Start Measure
Specifies the first measure of the loop.
Loop End Measure
Specifies the last measure of the loop.
Play Intro
On (checked): After the measures before the specified
"Loop Start Measure" are played once, the region of "Loop
Start Measure" – "Loop End Measure" will be played
repeatedly.
For example, you can use this on a drum track to make it
play a fill-in and then begin looping.
Off (unchecked): Playback will begin from the "Loop Start
Measure," and will begin looping immediately.
538
This will be valid if "Track Play Loop" is checked and
"Loop Start Measure" is set to other than 001.
Example) When "Play Intro" is checked
[(00...17)]
Track 1 will loop as follows.
[Off, On]
M001 – M002 – M003 – M004 – M003 – M004 –M003 –
M004...
When "Play Intro" is not checked
[001...999]
[001...999]
[Off, On]
Track 1 will loop as follows.
M003 – M004 – M003 – M004 – M003 – M004 – M003
– M004...
In this way, you can use "Track Play Loop" to make the
realtime recording process more efficient.
0–3PMC