Korg KRONOS SGX-2 Parameter Manual page 1034

Effect Guide
LFO
LFO Frequency [Hz]
Sets the LFO speed.
WAH
Frequency Bottom
Sets the lower limit of the wah center frequency. See
"Frequency Bottom" on page 921.
Frequency Top
Sets the upper limit of the wah center frequency. See
"Frequency Bottom" on page 921.
Resonance
Sets the resonance amount.
Low Pass Filter
Switches the wah low pass filter on and off.
OUTPUT
Pan
Sets the stereo image.
Wet/Dry
Sets the balance between the effect and the dry input.
Source
Selects a modulation source for Wet/Dry.
Amount
Sets the modulation amount for Wet/Dry.
Chorus/Flanger
Pre EQ
Trim
Sets the EQ input level.
LEQ Gain [dB]
Sets the gain of the Low EQ.
HEQ Gain [dB]
Sets the gain of the High EQ.
LFO
Waveform
Selects the LFO Waveform.
Frequency [Hz]
Sets the LFO speed.
FLANGER
Delay Time [msec]
Sets the delay time.
Depth
Sets the depth of LFO modulation.
Feedback
Sets the feedback amount. See "Feedback" on page 948.
1020
[0.02...20.00]
[0...100]
[0...100]
[+0...+100]
[Check-box]
[L000...C064...R127]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]
[0...100]
[–15...+15]
[–15...+15]
[Triangle, Sine]
[0.02...20.00]
[0.0...1350.0]
[0...100]
[+/–100]
OUTPUT
Pan
Sets the stereo image.
Wet/Dry
Sets the balance between the effect and the dry input.
Source
Selects a modulation source for Wet/Dry.
Amount
Sets the modulation amount for Wet/Dry.
Phaser
LFO
Waveform
Selects the LFO Waveform.
Frequency [Hz]
Sets the LFO speed.
PHASER
Manual
Sets the frequency to which the effect is applied.
Depth
Sets the depth of LFO modulation.
Resonance
Sets the resonance amount. See "Resonance" on page 950.
OUTPUT
Pan
Sets the stereo image.
Wet/Dry
Sets the balance between the effect and the dry input.
Source
Selects a modulation source for Wet/Dry.
Amount
Sets the modulation amount for Wet/Dry.
Multi-tap BPM Delay
MT DELAY
BPM
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. See "BPM" on page 967.
Time Over? >
Displays an error message when the delay time exceeds the
upper limit. See "Time Over? R >" on page 989.
Tap1 Base Note
Selects the type of notes to specify the delay time for Tap1.
See "Base Note" on page 967.
[L000...C064...R127]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]
[Triangle, Sine]
[0.02...20.00]
[0...100]
[0...100]
[+/–100]
[L000...C064...R127]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]
[MIDI, 40.00...300.00]
[---, OVER!]
[r ... w ]