Korg KRONOS SGX-2 Parameter Manual page 901

Audio CD
In Sampling mode, the sound from an audio CD in a USB
external CD drive can be processed by the insert effects,
master effects, and total effects.
Use the Bus Select setting in the P5: Audio CD - Ripping
page to specify the bus to which the CD audio will be sent.
You can choose from L/R, IFX1–12, 1–4, 1/2–3/4, or Off. If
you want to apply an insert effect, choose IFX1–12.
Fig. 2–5a
Disk mode
In Disk mode P1: Play Audio CD as well you can play back
an audio CD and process the sound through the insert
effects, master effects, and total effects. Bus Select, Send1,
Send2, FX Ctrl Bus, REC Bus, Pan, and Level are linked
with the settings of Sampling mode.
In Disk mode, effects will use the settings of the mode in
which you previously were.
Insert Effects (IFX1...IFX12) Routing
The Send1 (to MFX1) and Send2 (to MFX2) settings
which specify the send levels to the master effects are valid
if Bus Select is set to L/R or Off. If Bus Select is set to
IFX1–12, use the post-IFX Send1 and Send2 settings to
specify the send levels.
The diagram (Fig. 2–5a) shows an example in which the
input from a USB-connected external CD drive is panned to
left and right, and sent to insert effect 1.
887