190: Black Chorus; 191: Ep Chorus - Korg KRONOS SGX-2 Parameter Manual

190: Black Chorus

Modeled after a classic stereo chorus known for both crystal-
clean tone and quiet operation, and especially well-suited to
tine electric pianos.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Chorus
Input Gain
Right
LFO
CHORUS
Intensity
This controls different things, depending on the Mode
setting (see below).
When Mode is set to Chorus, Intensity blends between the
wet and dry signals.
When Mode is set to Pitch Modulation, Intensity blends
between chorus (at 0) and vibrato (at 100).
When Mode is set to Flanger, Intensity controls the
feedback amount.
Source
This selects a modulation source to control the Intensity.
Amount
This controls the depth and direction of the Intensity
modulation.
Width
This controls the amount of LFO modulation.
Source
This selects a modulation source to control the Width.
Amount
This controls the depth and direction of the Width
modulation.

191: EP Chorus

This is inspired by a rare chorus built into an early version of
a famous modified tine piano.
CHORUS
Depth
This sets the depth of LFO modulation.
Source
This selects a modulation source to control the Depth.
Wet / Dry
Mode & Intensity
+
Mono
-
+ Output Mode
Stereo
Wet / Dry
[1...100]
[List of Dmod Sources]
[–100...+100]
[0...100]
[List of Dmod Sources]
[–100...+100]
[0...100]
[List of Dmod Sources]
Vintage 190: Black Chorus
LFO
Speed [Hz]
This controls the speed of the LFO.
Source
This selects a modulation source to control the Speed. For a
list of Dmod sources, see the "Dynamic Modulation Source
List" on page 1118.
Amount
This controls the depth and direction of the Speed
modulation.
MODE
Mode [Chorus, Pitch Modulation, Flanger]
This controls the basic sound of the effect.
Chorus is a standard chorus sound.
Pitch Modulation is a lighter chorus effect.
Flanger adds feedback, for more extreme timbres.
Input Gain
This controls the input into the effect. High levels will add
saturation.
Output Mode
This controls whether the output is stereo or mono. When set
to Stereo, the left-right spread is controlled by the Width
parameter.
OUTPUT
Wet/Dry
Sets the balance between the "wet" processed sound and the
dry input.
Note: When Mode is set to Chorus, the Intensity control is
the same as Wet/Dry.
Source
Selects a modulation source for Wet/Dry.
Amount
Sets the modulation amount for Wet/Dry.
Amount
This controls the depth and direction of the Depth
modulation.
LFO
Speed [Hz]
This controls the speed of the chorus' LFO.
[0.10...10.00]
[List of Dmod Sources]
[–10.0...+10.0]
[0...100]
[Mono, Stereo]
[Dry, 1: 99...99:1, Wet]
[List of Dmod Sources]
[–100...+100]
[–100...+100]
[0.10...10.00]
1035