Mod-7: Page Menu Commands; Copy Vpm Oscillator; Swap Vpm Oscillators - Korg KRONOS SGX-2 Parameter Manual

MOD-7: Page Menu Commands

Copy VPM Oscillator

This command copies all the parameters of one VPM
Oscillator to another VPM Oscillator. A dialog box allows
you to select the source and destination Oscillators, within
the current Program.

Swap VPM Oscillators

This command swaps all of the parameters between two
VPM Oscillators, like copying each to the other in a single
step. Note that it does not automatically copy any Patch
Panel connections; you'll need to do that manually, if
necessary.
For instance, let's say that you've created a custom
algorithm bit by bit, and you end up with two chains of
Modulators and Carriers:
VPM Osc 1–>VPM Osc 2–>VPM Osc 6
VPM Osc 4–>VPM Osc 5–>VPM Osc 3
To make the algorithm easier to understand, you might want
to do the following:
1. Use the Swap VPM Oscillator command to swap the
parameters of VPM Osc 3 and VPM Osc 6.
2. Manually correct the Patch Panel connections to VPM
Osc 3 and 6, as necessary.
MOD-7: Page Menu Commands Copy VPM Oscillator
395