Korg KRONOS SGX-2 Parameter Manual page 453

Scan Zone
The key zone settings of the KARMA Modules are
displayed as solid blue lines under the notes display.
For more information, see "Bottom (Key Zone Bottom)" on
page 486.
Scene
Module CCs Notes Scan Zone
0–6d: Realtime Controls
This displays the values, names, and stored settings of
KARMA SLIDERS 1–8 and KARMA SWITCHES 1–8.
Note that each Scene can have separate values and stored
settings for each of the sliders and switches.
KARMA SWITCHES 1...8
Current Value 1...8
This shows the current setting of the KARMA SWITCH.
You can control this either by using the physical front-panel
switch, or by touching the on-screen switch.
Stored Value 1...8
This shows stored value of the KARMA SWITCH for the
current Scene, as written into the Combination.
Control Timbre Category 1...8
This shows the category of the Program(s) being played by
the switch's KARMA module. For instance, if the KARMA
module is playing a drum pattern, this would show Drums.
If the module is playing multiple Programs of different
categories, this will show Multi.
Name 1...8
This shows the name of the KARMA SWITCH. You can
assign this name in Program 7–9: Name/Map.
KARMA SLIDERS 1...8
Current Value 1...8
This shows the current setting of the KARMA SLIDER.
You can change this either by using the physical front-panel
slider, or by touching the on-screen slider and then using any
of the data-entry controls.
Stored Value 1...8
This shows stored value of the KARMA SLIDER for the
current Scene, as written into the Combination.
Control Timbre Category 1...8
This shows the category of the Program(s) being played by
the slider's KARMA module. For instance, if the KARMA
module is playing a drum pattern, this would show Drums.
If the module is playing multiple Programs of different
categories, this will show Multi.
Name 1...8
This shows the name of the KARMA SLIDER. You can
assign this name in Program 7–9: Name/Map.
Combination P0: Play 0–6: KARMA GE
v 0–6: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Write Combination. For more information, see
"Write Combination" on page 515.
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Copy From Program. For more information, see
"Copy From Program" on page 515.
• 3: Copy KARMA Module. For more information, see
"Copy KARMA Module" on page 520.
• 4: Initialize KARMA Module. For more information,
see "Initialize KARMA Module" on page 521.
• 5: Copy Scene. For more information, see "Copy Scene"
on page 164.
• 6: Swap Scene. For more information, see "Swap Scene"
on page 164.
• 7: Capture Random Seed. For more information, see
"Capture Random Seed" on page 164.
• 8: Auto Assign KARMA RTC Name. For more
information, see "Auto Assign KARMA RTC Name" on
page 521.
• 9: Add to Set List. For more information, see "Add To
Set List" on page 154.
439