Korg KRONOS SGX-2 Parameter Manual page 160

Program mode: HD-1
Note that edits to effects parameters are automatically stored
with the Program–you don't need to store them as an Effect
Preset. Presets just make it easier to re-use your favorite
settings.
For instance, you can save an Effect Preset while working on
a particular Program, and then later use the same Effect
Preset in a different Program, Combi, or Song.
P00: Initial Set: These are the default settings that are
recalled when you select an effect type in the Insert FX page.
You can't save your own settings here.
P01...P15: These usually contain Korg preset data (though
some effects may not include presets). We recommend that
you store your settings in U00–U15.
U00...U15: These are areas in which you can store your
own settings.
---------------: This shows that no Effect Preset has been
selected. You'll see this if you've just selected an effect,
written a Program, or selected a new Program. Selecting this
setting from the menu will not have any effect.
Note: Programs save the effects parameter settings, but they
don't save the number of the selected Effect Preset. If you
select an Effect Preset, and then save the Program, the Effect
Preset setting will revert to "--------------."
Using Effect Presets
1. Select an effect in the Insert FX page.
2. The P00: Initial Set settings will be recalled.
"P (Effect Preset)" will show --------.
3. Use "P (Effect Preset)" to select an effect preset: P00–
P15 or U00–U15.
The stored parameters will be recalled. Note that this will
overwrite all parameters of the effect.
4. Edit the recalled parameters as desired.
5. If you've come up with settings you like and want to
save them as a new preset, use the Write FX Preset
menu command.
IFX1 Parameters
This tab shows the parameters for IFX1, as selected on the
P8: Insert FX page.
For details on the specific parameters of each effect, please
see "Insert Effects (IFX1...IFX12)" on page 878.
8–7b: IFX2...12
These tabs show the parameters for IFX2-12, as selected on
the P8: Insert FX page. They have the same controls as
described under "8–7a: IFX1," above.
v 8–7: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Write Program. For more information, see "Write
Program" on page 153.
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Copy Insert Effect. For more information, see "Copy
Insert Effect" on page 166.
146
• 3: Swap Insert Effects. For more information, see
"Swap Insert Effect" on page 166.
• 4: Write FX Preset. For more information, see "Write
FX Preset" on page 170.