7-2: Midi Filter/Cc Offset - Korg KRONOS SGX-2 Parameter Manual

Program mode: HD-1
7–2: MIDI Filter/CC Offset
7–2a
7–2b
7–2c
In this page you can make MIDI-related settings for
KARMA. You can specify the following settings.
• MIDI filtering for the KARMA module
• MIDI control change messages transmitted when
KARMA is turned on (CC Offset parameters)
7–2a: Program Name and Tempo
Bank
Bank Type
Program
q (Tempo)
These are the current bank, bank type (HD-1 or EXi),
Program, and Tempo. For more information, see "1–1a:
Program Name and Tempo" on page 41.
7–2b: MIDI Filter
Receive MIDI Filter
This specifies whether filters will be applied to the MIDI
control data received by the KARMA Module before it is
passed on (echoed) to the tone generator.
On (checked): The corresponding MIDI data will be echoed
to the tone generator.
Off (unchecked): The corresponding MIDI data will not be
echoed to the tone generator.
When KARMA is on, the MIDI control data received by the
KARMA Module will be transmitted to the tone generator
without change. Depending on these settings, you can (for
114
[INT–A...F, GM, g(1...9), g(d),
USER–A...G and AA...GG]
[HD-1, EXi]
[0...127 (INT and USER Banks),
1...128 (GM Banks)]
[040.00...300.00, EXT]
example) make settings so that the damper pedal is enabled
when the KARMA Module is off, and disabled when it is on.
(See the diagram below, "KARMA Receive/Transmit
Filter.")
These settings do not affect the Dynamic MIDI (7–7)
settings. If you have specified MIDI control data as the
Dynamic MIDI source, it will be valid regardless of these
settings.
After Touch
Specifies whether MIDI aftertouch messages will be echoed
to the tone generator.
Pitch Bend
Specifies whether MIDI pitch bend messages will be echoed
to the tone generator.
Damper (CC#64)
Specifies whether MIDI control change message #64 Sustain
(damper pedal) will be echoed to the tone generator.
JS+Y (JS+Y CC#01)
Specifies whether MIDI control change message #1 (internal
joystick +Y direction, specified as the assignment of a real-
time control knob, or Vector CC control) will be echoed to
the tone generator.
JS-Y (JS-Y CC#02)
Specifies whether MIDI control change message #2 (internal
joystick -Y direction, specified as the assignment of a real-
time control knob, or Vector CC control) will be echoed to
the tone generator.
7–2PMC
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]