Korg KRONOS SGX-2 Parameter Manual page 886

Effect Guide
Combination and Sequencer modes
Timbre 1 /MIDI Track 1
Timbre 16 /MIDI Track 16
Audio Track 1
Audio Track 16
Sampling mode
In Sampling mode, external audio sources from AUDIO
INPUT 1-2, USB, and S/P DIF IN jacks or the playback
from a USB-connected CD drive can be processed by insert
effects, master effects, and total effects, and then sampled.
Sampling mode
AUDIO INPUT (1, 2)
USB IN (1, 2)
S/P DIF IN (L, R)
Audio CD (USB CD-R/RW)
Oscillator
Audio Input
You can also use the external audio inputs in Program,
Combination, and Sequencer modes.
You can apply the insert effects, master effects, and total
effects to external audio sources and sample them, or use the
KRONOS as a 6-in (stereo analog, S/P DIF, and USB) 6-out
effect processor. You can also use an external mic input to
control a vocoder effect (026: Vocoder) applied to internal
sounds.
In Sequencer mode you can also use the effects when
recording external audio sources to audio tracks.
Audio Input (Program mode)
Oscillator1 Filter1
Oscillator2 Filter2
AUDIO INPUT (1, 2)
USB IN (1, 2)
S/P DIF IN (L, R)
872
EQ
EQ
EQ
EQ
EQ
Driver1 Amplifier1
Driver2 Amplifier2 EQ
Send
Master Effect 1, 2
Insert Effect 1–12
Use the P0: Recording– Audio Input page to make audio
input settings for Sampling mode. These settings apply only
to Sampling mode.
Samples that you've assigned as a multisample can also be
processed by the insert effects, master effects, and total
effects, and then resampled.
Send
Master Effect 1, 2
Insert Effect 1–12
Send
Master Effect 1, 2
Insert Effect 1–12
When effects are applied to the audio inputs, certain
effect types or parameter settings may cause oscillation to
occur. If this occurs, adjust the input level, output level,
or effect parameters. Please be aware of this particularly
when using an effect that has a high gain.
Use the P0– Audio Input/Sampling page of each mode to
make audio input settings. Alternatively, you can check Use
Global Setting and make these settings in the Global mode
P0: Basic Setup– Audio page. Normally you will leave Use
Global Setting checked. Uncheck this if you want programs
and combinations to use their own settings–for example,
when writing a program to use as a vocoder effect.
Send
Master Effect 1, 2
Insert Effect 1–12
Return
OUTPUT
Total Effect 1, 2
L/MONO, R
Return
Sample
Total Effect 1, 2
Recording
Return
Resampling
Total Effect 1, 2
Return
OUTPUT
Total Effect 1, 2
L/MONO, R