Combination P9: Master/Total Effect; 9-1: Routing - Korg KRONOS SGX-2 Parameter Manual

Combination mode

Combination P9: Master/Total Effect

Here you can make settings for the master effects and total
effects. For instance, you can:
• Route a sound to an master effects and total effects
9–1: Routing
1–1a
9–1a
9–1b
Here you can specify the type of master effects and total
effects, and turn them on/off. The meters below the effects
names display the effect output levels in realtime, showing
the combined peak signals of the left and right channels.
The master effects are sent to the L/R bus. The total effects
are inserted into the L/R bus.
9–1a: MFX1, 2
MFX1
MFX1
MFX1 On/Off
Return 1
MFX2
MFX2
MFX2 On/Off
Return 2
512
• Make detailed settings for master effects and total effects
For more information, please see "Effect Guide" on
page 871.
Chain
Chain On/Off
Chain Direction
Chain Level
These parameters are the same as in Program mode. For
more information, please see "9–1a: MFX1, 2" on page 149.
9–1b: TFX1, 2
[000...197]
TFX1
[Off, On]
TFX1
[000...127]
TFX1 On/Off
TFX2
[000...197]
TFX2
[Off, On]
TFX2 On/Off
[000...127]
These parameters are the same as in Program mode. For
more information, please see "9–1b: TFX1, 2" on page 150.
9–1PMC
9–1c
[MFX1->MFX2, MFX2->MFX1]
[Off, On]
[000...127]
[000...197]
[Off, On]
[000...197]
[Off, On]