Initialize Karma Module - Korg KRONOS SGX-2 Parameter Manual

Settings copied by "Copy KARMA Module"
When copying from a program
If "GE RTP Control Setting & Scenes" and "Perf. RTP &
Panel Settings" are Off (checked), the following content is
copied.
• The GE selected by the copy-source KARMA module.
• Settings of the KARMA module parameters (7–3:
Module Parameter-Trigger, 7–4: Module Parameter-
Control).
• 7–5: GE RTP page "MIN," "MAX," and "VALUE"
settings.
If you turn "GE RTP Control Setting & Scenes" On
(checked)
In addition to the content copied when "GE RTP Control
Setting & Scenes" is Off (unchecked), the following
content is copied.
• 7–5: GE RTP page "ASSIGN" and "POLARITY"
settings.
• The scene selected in the master buffer, the KARMA
CONTROLS slider and KARMA SWITCH settings of
each scene (0–6d: Realtime Controls and 0–9f: R.Time
Knobs/KARMA settings).
• 7–8: Name/Note Map controller name settings.
If you turn "Perf. RTP & Panel Setting" On (checked)
In addition to the content copied when "Perf. RTP &
Panel Settings" is Off (unchecked), the following content
is copied.
• "Tempo" setting.
• "Time Signature" setting.
• KARMA ON/OFF switch setting.
• KARMA LATCH switch setting.
• 7-5: GE Real-Time Parameters/Scene page, Drum Track
Run setting.
• 7–6: Perf Real– Time Parameters page settings.
• 7–7: Dynamic MIDI page settings.
When copying from a combination or song
If "GE RTP Control Setting & Scenes" and "Perf. RTP &
Panel Settings" are Off (unchecked) when you copy from a
combination or song, the following content is copied.
• The GE selected for the copy-destination KARMA
module (including the GE realtime parameters).
• KARMA module parameters (7–3: Module Parameter-
Trigger, 7–4: Module Parameter-Control).
• 7–5: GE RTP page "MIN," "MAX," and "VALUE"
settings.
If you turn "GE RTP Control Setting & Scenes" On
(checked)
In addition to the content copied when "GE RTP Control
Setting & Scenes" is Off (unchecked), the following
content is copied.
• 7–5: GE RTP page "ASSIGN" and "POLARITY"
settings.
• The KARMA CONTROLS slider and KARMA
SWITCH settings of each scene in the copy-source
buffer, and the currently selected scene.
• 7–8: Names/Note Map controller name settings.
Program: Page Menu Commands Initialize KARMA Module
If you turn "Perf. RTP & Panel Setting" On (checked)
In addition to the content copied when "Perf. RTP &
Panel Settings" is Off (unchecked), the following content
is copied.
• "Tempo" setting.
• "Time Signature" setting.
• KARMA ON/OFF switch setting.
• KARMA LATCH switch setting.
• KARMA Module Control switch setting.
• 7-5: GE Real-Time Parameters/Scene page, Drum Track
Run setting.
• 7–6: Perf Real– Time Parameters page settings.
• 7–7: Dynamic MIDI Page settings.
The "Input Channel" and "Output Channel"
(Combination/Sequencer P7–1) settings of a combination
or song are not copied.

Initialize KARMA Module

Initialize KARMA Module is available on all of the
KARMA pages, as well as the KARMA GE tab of the Play
page.
This command sets the KARMA Module's parameters to
their default values.
The GE selection will not be initialized. The GE
parameters will be set to the selected GE's default values.
1. Select "Initialize KARMA Module" to open the dialog
box.
2. As appropriate for the settings you want to initialize,
you can turn on (check) the "GE RTP Control settings
& Scenes" and/or "Perf. RTP" options.
For more information, see "Settings initialized by Initialize
KARMA Module," below.
3. To initialize the settings, press the OK button. To
cancel without initializing, press the Cancel button.
Settings initialized by Initialize KARMA Module
If you initialize with the GE RTP Control Settings &
Scenes and Perf. RTP options turned off (unchecked), the
following parameters will be initialized.
• 7–1–4, 8 module parameters.
• 7–5: GE Real– Time Parameters page "MIN," "MAX,"
and "VALUE" (they will return to the values preset by
the GE).
The GE selection will not be initialized.
If you initialize with "GE RTP Control Settings & Scenes"
turned on (checked):
In addition to the parameters listed above, the following
parameters will also be initialized.
• 7–5: GE Real– Time Parameters page "ASSIGN"
( Off) and "POLARITY" ( +).
• KARMA CONTROLS slider and KARMA SWITCH
settings in each scene ( 064/0).
• KARMA CONTROLS slider and KARMA SWITCH
names ( no name).
If you initialize with "Perf. RTP" turned on (checked):
163