Save To Standard Midi File - Korg KRONOS SGX-2 Parameter Manual

4. Press the OK button to save, or press the Cancel
button if you decide not to save.

Save to Standard MIDI File

This command saves the selected song from internal
memory to storage media as a .MID file (Standard MIDI
File).
Save to Standard MIDI File is valid only when the current
directory is a DOS directory. If you are browsing inside a
.PCG, .SNG, .KSC, or .KGE file, for instance, the menu
command will be grayed out.
Note: This applies only to MIDI track data. Audio track data
will not be saved.
1. Select "Save to Standard MIDI File" to open the
dialog box.
Save Song as Standard MIDI File
2. In Song, select the Song that you wish to save.
3. If "Exclusive" is On (checked), System Exclusive
events and Universal Exclusive events included in the
song data will be saved as exclusive messages.
If this is Off (unchecked), system exclusive events and
universal exclusive events included in the song data will
not be saved.
4. Use the text edit button to open the text edit dialog
box, and set the name as desired.
By default, the name will be the first eight characters of
the song name, in uppercase.
If a USB QWERTY keyboard is connected, you can use
this to enter text instead of the on-screen keyboard. For
more information, see "Editing names and entering text"
on page 201 of the Operation Guide.
5. Use the radio buttons to specify the format.
Format 0 will save sixteen channels of MIDI data
together in a single track.
Format 1 will save each MIDI channel to a separate
track.
6. To save the data, press the OK button. To cancel, press
the Cancel button.
Disk: Page Menu Commands Save to Standard MIDI File
The song data (MIDI track data) you save here can be
played back on a device that supports Standard MIDI
Files. However if you intend to playback the data on the
KRONOS, we recommend that you use "Save SEQ" to
save the data, since this will allow a higher degree of
reproducibility.
861