Korg KRONOS SGX-2 Parameter Manual page 721

Knob 5–8
This is the current value of the knob and its MIDI CC.
You can set knobs 5–8 to a wide variety of modulation
functions, using the Controller Setup page (P1–8).
Many of the functions scale a particular set of Program
parameters. All of the settings also correspond to MIDI
messages–usually CCs.
v 0–9: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Delete Sample. For more information, see "Delete
Sample" on page 737.
• 1: Copy Sample. For more information, see "Copy
Sample" on page 738.
• 2: Rename Sample. For more information, see "Rename
Sample" on page 738.
• 3: Move Sample. For more information, see "Move
Sample" on page 738.
• 4: Sample Mono To Stereo. For more information, see
"Sample Mono To Stereo (Change Sample Type)" on
page 739.
• 5: Delete MS. For more information, see "Delete MS
(Delete Multisample)" on page 739.
• 6: Copy MS. For more information, see "Copy MS
(Copy Multisample)" on page 740.
• 7: Rename MS. For more information, see "Rename MS
(Rename Multisample)" on page 740.
• 8: Move MS. For more information, see "Move MS
(Move Multisample)" on page 741.
• 9: Convert MS To Program. For more information, see
"Convert MS (Multisample) To Program" on page 740.
• 10: MS Mono To Stereo. This will appear only if the
current MS is Mono. For more information, see "MS
Mono To Stereo/MS Stereo To Mono
(Change Multisample Type)" on page 741.
• 10: MS Stereo To Mono. This will appear only if the
current MS is Stereo. For more information, see "MS
Mono To Stereo/MS Stereo To Mono
(Change Multisample Type)" on page 741.
• 11: Optimize RAM. For more information, see
"Optimize RAM" on page 155.
• 12: Select Directory/File for Sample to Disk. This
applies only when Save to is set to Disk. For more
information, see "Select Directory/File for Sample To
Disk" on page 156.
• 13: Auto Sampling Setup. For more information, see
"Auto Sampling Setup" on page 742.
Sampling P0: Recording 0–9: Control Surface
[000...127]
707