0-8: Audio In/Sampling - Korg KRONOS SGX-2 Parameter Manual

Sequencer mode
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Rename Song. For more information, see "Rename
Song" on page 637.
• 3: Initialize Song. For more information, see "Initialize
Song" on page 637.
• 4: Copy From Song. For more information, see "Copy
From Song" on page 637.
• 5: Load Template Song. For more information, see
"Load Template Song" on page 637.
• 6: Save Template Song. For more information, see
"Save Template Song" on page 638.
• 7: FF/REW Speed. For more information, see "FF/REW
Speed" on page 638
0–8: Audio In/Sampling
0–7a
0–8a
0–8c
Here you can adjust the settings for the analog/digital audio
signal input (AUDIO INPUT, S/P DIF), and the sampling-
related settings for Sequencer mode.
In Sequencer mode, the external audio sources you specify
here can be recorded to audio tracks or sampled. (You can
also record or sample a song that's played back by the
KRONOS or your own playing on the keyboard.) You can
also use the KRONOS as a 6-in/6-out effect processor.
You can't record a Song or pattern while sampling. Nor
can you sample while recording a Song or pattern.
Using the control surface to adjust Audio Inputs
You can use the control surface to adjust the Audio Input
Send1 (to MFX1), Send2 (to MFX2), Play/Rec/Mute, Solo
On/Off, Pan, and Level.
For more information, please see "0–9c: Audio Inputs" on
page 30.
546
• 8: Set Location (for Locate Key.) For more information,
see "Set Location (for Locate Key)" on page 639.
• 9: GM Initialize. For more information, see "GM
Initialize" on page 639.
• 10: Copy From Combi. For more information, see
"Copy from Combi" on page 639.
• 11: Copy From Program. For more information, see
"Copy From Program" on page 639.
• 12: Add to Set List. For more information, see "Add To
Set List" on page 154.
• 13: Load required samples. For more information, see
"Load required samples" on page 154.
The control surface will control the Global mode settings
if "Use Global Setting" is On (checked).
0–8a: Audio Input
These parameters control the level, pan, play/mute and solo
status, send levels, and bus assignments for each of the
analog and digital inputs. For more information, see "0–8a:
Audio Input" on page 19.
Use Global Setting
Each Song can either use the single, Global audio input
mixer setup, or have its own custom settings. For more
information, see "Use Global setting" on page 19.
0–8PMC
0–8b
[Off, On]