Table of Contents
Advertisement
Program mode: EXi
4–2a: EXi 1
Input Source
L/R Output, Indiv. Output 1/2...3/4,
This selects the input source for EXi1. You can use this to
create a feedback loop, if desired.
Off disables the input.
Audio Input 1/2, USB 1/2, and S/P DIF Input L/R use the
live audio from the selected input.
L/R Output and Indiv. Output 1/2...3/4 use the audio as it
is heard from the selected output (like connecting a cable
from the output back to the input).
4–3: Drum Track
This page works the same as the similar page in HD-1
Programs. For detailed information, see "1–3: Drum Track"
on page 47.
4–5: Vector Control
Vector Synthesis lets you control Program and Effects
parameters by moving the Vector Joystick, by using the
programmable Vector Envelope, or by the combination of
the two.
This page works exactly like the similar page for HD-1
Programs, substituting EXi 1/2 for OSC 1/2. For more
information, see "1–5: Vector Control" on page 51.
4–6: Vector Envelope
The Vector Envelope works together with the Vector
Joystick to control the Vector position. It's also special
because it's the only programmable modulation source
which lets you modulate both Program and Effects
parameters.
The Vector Envelope is different from the other envelopes in
several ways:
• Each point has two "levels" - one for the X axis, and one
for the Y axis.
• The envelope times can be based on seconds and
milliseconds, or synced to tempo.
• Each point has a hold time, as well as a transition time to
the next point.
• The envelope can loop between two points, for either a
specified number of repeats, or as long as you hold the
note.
This page works exactly like the similar page for HD-1
Programs, substituting EXi 1/2 for OSC 1/2. For more
information, see "1–6: Vector Envelope" on page 55.
182
[PRG, Off, Audio Input 1/2,
USB 1/2, S/P DIF Input L/R,
REC 1/2...3/4, FX Control 1, 2,
IFX 1...12, MFX 1, 2, TFX 1, 2]
REC 1/2...3/4 and FX Control 1, 2 use the audio from the
selected bus.
IFX 1...12, MFX 1, 2, and TFX 1, 2 use the output of the
selected effect.
Channel Select
Stereo/L+R: This selection routes a stereo signal to EXi
with stereo inputs, and an L+R summation to EXi with mono
inputs.
Left, Right: This uses only a mono signal from the selected
channel.
4–2b: EXi 2
EXi 2 has the same controls as EXi 1, above.
v 4–5: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Write Program. For more information, see "Write
Program" on page 153.
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Copy EXi Oscillator. For more information, see
"Copy EXi Oscillator" on page 188.
v 4–6: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Write Program. For more information, see "Write
Program" on page 153.
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Copy EXi Oscillator. For more information, see
"Copy EXi Oscillator" on page 188.
[Stereo/L+R, Left, Right]
Advertisement
Table of Contents
