Table of Contents
Advertisement
Keyboard & Assigned graphics
This shows the selected key, and the keys to which a pattern
has been assigned by the RPPR function. See diagram
below.
Non-assignable
keys
Key range
Key range shown in the
RPPR Setup List
5–3c: RPPR Setup
(KEY)
The current KEY is shown by a small, red triangle to the left
of the row.
Assign
On (checked): When you play the note specified by KEY,
the pattern selected in Pattern will be triggered.
Off (unchecked): That key will sound the currently selected
track at the corresponding pitch, just as in normal Sequencer
mode.
Pattern Bank
Pattern
Selects the RPPR pattern for the key selected in KEY. If the
selected user pattern contains no musical data, there will be
no sound when you press that key.
Track
[MIDI Track 01...MIDI Track16]
Selects the track that will be used for the RPPR pattern
selected for the KEY. When you play the key, the pattern
will be played according to the settings of the track you
select here. You can make track settings in the P0:
Play/REC–P3: MIDI Filter pages.
When you record in realtime with the RPPN function turned
on, the data will be recorded on the track you select here. For
details, see "Using RPPR (Realtime Pattern Play/Record)"
on page 120.
"Information" shows the bank, name, and number of the
program that's selected for Track.
Mode
Specifies the way in which the pattern assigned to the
specified KEY will be played.
Once: When you press the key, the complete pattern will
playback once to the end and then stop.
Manual: The pattern will continue repeating as long as you
continue holding the key, and will stop as soon as you
release the key.
Assigned keys and
tracks
C4
Selected key
[C#2...C8]
[Off, On]
[Preset, User]
[P000...718, U00...99]
[Once, Manual, Endless]
Sequencer P5: Pattern/RPPR 5–3: RPPR Setup
Track of the
Track selected by
selected key
Track Select
Key range
Endless: The pattern will continue repeating even after you
release the key. To stop the pattern playback, press any note
below C2, or press the same key once again.
Key-on
Key-off
START
ST O P
O nce
START
ST O P
M anual
START
Endless
Shift
Adjusts the playback pitch of the pattern for the specified
KEY in semitone steps over a range of ±1 octave.
With a setting of 0, the pattern will be played at its original
pitch.
Sync
Specifies the way in which the pattern playback will be
synchronized when you press the specified KEY.
Off: The pattern will begin playing at the moment you press
the note.
Beat: The pattern will synchronize to the beats of the pattern
that was started by the first key (i.e., the first note-on that
occurs from a condition where no notes of the keyboard are
pressed). This setting is suitable when you wish to play
phrase patterns in unison.
Measure: The pattern will synchronize to the measures of
the pattern that was started by the first key. This setting is
suitable for rhythm, bass or drum patterns.
SEQ: The pattern will synchronize to the measures of the
sequencer song.
Same key, or C 2
Key-on
ST O P
[–12...+12]
[Off, Beat, Measure, SEQ]
605
Advertisement
Table of Contents
