Korg KRONOS SGX-2 Parameter Manual page 164

Program mode: HD-1
Category/MFX Select menu
MFX2
MFX2
MFX2 On/Off
Return 2
These parameters specify the effect type for master effect 2,
its on/off status, and the return level from master effect 2 to
the L/R bus. See "MFX1" on page 149.
Chain:
Chain On/Off
On (checked): Chain (series connection) will be turned on
for MFX1 and MFX2.
Chain Direction
Specifies the direction of the connection when MFX1 and
MFX2 are chained.
MFX1 MFX2: Connect from MFX1 to MFX2.
MFX2 MFX1: Connect from MFX2 to MFX1.
Chain Level
When chain is On, this sets the level at which the sound is
sent from the first master effect to the next master effect.
9–1b: TFX1, 2
These are the parameters for total effect 1 and 2, which are
placed at the final stage of the L/R bus. After passing
through the total effects, the sound is output to AUDIO
OUTPUT (MAIN OUT) L/MONO and R.
For the total effects, the direct sound (Dry) is always stereo-
in/out. The input/output configuration of the effect sound
(Wet) will depend on the selected effect type.
The total effects are stereo-in and stereo-out, but the output
may be monaural depending on the type of effect you select.
(See "In/Out" on page 878.)
150
[000...197]
[Off, On]
[000...127]
[Off, On]
[MFX1->MFX2, MFX2->MFX1]
[000...127]
TFX1
TFX1
This selects the effect type for total effect 1. You can use any
of the available effects, without limitation.
Category/TFX Select menu
When you press the popup button, the Category/TFX Select
menu will appear, letting you choose effect types by
category. Use the tabs to select an effect category, and then
choose an effect within that category. Press the OK button to
execute your choice, or press the Cancel button to cancel.
You can also use the Find button to search for effects by
name. The button is marked with a magnifying-glass icon,
and is located at the bottom of the window to the right of the
OK button. For more information, see "Find dialog" on
page 5.
TFX1 On/Off
This turns total effect 1 on/off. If this is off, the input
will be passed directly through. The setting will
alternate between on/off each time you press this.
Separately from this setting, you can use control change
#95 to turn both total effects off. A value of 0 turns them
off, and values of 1–127 restore the original setting. The
global MIDI channel specified by MIDI Channel
(Global 1–1a) is used for this message.
TFX2
TFX2
TFX2 On/Off
These parameters specify the effect type and on/off status for
total effect 2. See "TFX1" on page 150.
[000...197]
[Off, On]
[000...197]
[Off, On]