Korg KRONOS SGX-2 Parameter Manual page 630

Sequencer mode
q (Tempo)
For more information, see "Tempo" on page 5.
7–5b: GE Real-Time Parameters for
Module Control = Master
GE PARAMETER
MIN (Minimum Value)
MAX (Maximum Value)
VALUE
ASSIGN [---, Slider1...8, Slider (SW)1...8, SW1...8,
POLARITY
For more information, see "7–5b: GE Real-Time
Parameters" on page 124 and "7–5b: GE Real-Time
Parameters for Module Control = Master" on page 493.
Note: Normally, the MIN, MAX, VALUE, and
POLARITY parameters of each module are specified in
module A, B, C, and D. These parameter settings are
possible if you specify ASSIGN in Master A, B, C, and D.
For example, if you want to use Slider1 to control the GE
REALTIME PARAMETER No.1 of modules A, B, C, and D
when Module Control is set to Master, you would set the
Master, A, B, C, and D's GE REALTIME PARAMETER
No.01 ASSIGN to Slider1. If these are set to ASSIGN, you
are able to edit the MIN, MAX, VALUE, and POLARITY
parameters for Master, A, B, C, and D.
In this way, you can make GE realtime parameter settings
independently of modules A, B, C, and D.
7–5c: GE Real-Time Parameters for
Module Control = A, B, C, D (1-32)
For details on the parameters in this section, see "7–5b: GE
Real-Time Parameters" on page 124, and "7–5c: GE Real-
Time Parameters for Module Control = A, B, C, D" on
page 494.
7–5d: Scene Matrix
For details on the parameters in this section, see "7–5d:
Module Control Scene Matrix" on page 494.
Scene Change Quantize Window
Scene Change Quantize Window
Scene Selection
Master
A
B
C
D
616
[040.00...300.00, EXT]
[Parameter Name]
[–5000...+5000]
[–5000...+5000]
[–5000...+5000]
DynaMIDI1...8]
[+, –]
x! q
[ ... , 1
Bar...4 Bars]
[1...8]
[1...8]
[1...8]
[1...8]
[1...8]
Link Scenes To Master
A
B
C
D
Enable RTC By Master
A
B
C
D
Drum Track Run
Drum Track Run 1...8
v 7–5: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Memory Status. For more information, see "Memory
Status" on page 637.
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Copy KARMA Module. For more information, see
"Copy KARMA Module" on page 520.
• 3: Initialize KARMA Module. For more information,
see "Initialize KARMA Module" on page 521.
• 4: Copy Scene. For more information, see "Copy Scene"
on page 521.
• 5: Swap Scene. For more information, see "Swap Scene"
on page 521.
• 6: Capture Random Seed. For more information, see
"Capture Random Seed" on page 521.
• 7: FF/REW Speed. For more information, see "FF/REW
Speed" on page 638.
• 8: Set Location (for Locate Key). For more
information, see "Set Location (for Locate Key)" on
page 639.
• 9: Copy From Program. For more information, see
"Copy From Program" on page 639.
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]