131: Od/Hi Gain - Cho/Flanger; 132: Od/Hi Gain - Phaser; 133: Od/Hi Gain - Multitap Dly - Korg KRONOS SGX-2 Parameter Manual

131: OD/Hi Gain - Cho/Flanger

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Overdrive / Hi-Gain
3 Band PEQ
+
Driver
Output Level
Mode: Overdrive / Hi-Gain
Drive
Right
This effect combines a mono overdrive/high-gain distortion
and a chorus/flanger. You can change the order of the effects.
Routing
Routing [OD/HG > Flanger, Flanger > OD/HG]
Switches the order of the overdrive and chorus / flanger.

132: OD/Hi Gain - Phaser

This effect combines a mono overdrive/high-gain distortion
and a phaser. You can change the order of the effects.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Overdrive / Hi-Gain
3 Band PEQ
+
Driver
Output Level
Mode: Overdrive / Hi-Gain
Drive
Right
Routing
Routing [OD/HG > Phaser, Phaser > OD/HG]
Switches the order of the overdrive and phaser.

133: OD/Hi Gain - Multitap Dly

This effect combines a mono overdrive/high-gain distortion
and a multitap delay
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Overdrive / Hi-Gain
3 Band PEQ
+
Driver
Output Level
Mode: Overdrive / Hi-Gain
Drive
Right
OD/HI-GAIN
For detailed information, see "OD/HI-GAIN" on page 1003.
Wet / Dry
Routing
Chorus/Flanger
Chorus/Flanger
Normal
+
Output Mode
—
Wet Invert
Feedback
Cho/Flng Wet / Dry
Wet / Dry
LFO: Tri / Sine
Wet / Dry
Routing
Phaser
Phaser
Normal
+
Output Mode
—
Wet Invert
Resonance
Phaser Wet / Dry
Wet / Dry
LFO: Tri / Sine
Wet / Dry
Multitap Delay
Feedback
Delay
(2)
(1)
High Damp
Mt.Dly Wet / Dry
Wet / Dry
Mono-Mono Serial 131: OD/Hi Gain - Cho/Flanger
When Routing is set to Flanger > OD/HG, the
Chorus/Flanger's Output Mode will be grayed out and
internally set to Normal.
OD/HI-GAIN
For detailed information, see "OD/HI-GAIN" on page 1003.
CHORUS/FLANGER
This effect can produce either chorusing or flanging,
depending on the settings. For detailed information, see
"CHORUS/FLANGER" on page 1003.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 904.
When Routing is set to Phaser > OD/HG, the Phaser's will
be grayed out and internally set to Normal.
OD/HI-GAIN
For detailed information, see "OD/HI-GAIN" on page 1003.
PHASER
This is a mono phaser effect. For detailed information, see
"PHASER" on page 1004.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 904.
MULTITAP DELAY
For detailed information, see "MULTITAP DELAY" on
page 1002.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
"OUTPUT" on page 904.
1013